Renishaw Stylus Penang, Renishaw Stylus Malaysia

TP8 (Indexable but Non Repeatable Probe Head)

The TP8 probe offers an entry level option for customers that require infrequent indexing of the probe and no indexing during the running of a measurement programme.

PH6M

This head provides a fixed autojoint for when an SP25M scanning probe is required without the requirement for indexing. Compatible with the complete Renishaw multiwire probe range and standard probes with autojoint adaptors and extension bars.

MH20i (Manual Indexable Probe Head)

The MH20i probe offers repeatable manual indexing of the probe head from 0° to 90° in the A axis and through 360° in the B axis with a lever locks the head in one of up to 168 repeatable positions, set at 15° increments.

RTP20 (Automated Indexable Probe Head)

The RTP20 probe offers a cost effective solution for customers that require automatic indexing on CNC machines. Modelled on the MH20i body, the RTP20 uses the CNC motion of the CMM to position itself using a post mounted to the bed of the machine.

PH10T (Fully Motorised Probe Head)

The PH10T is a fully motorised probe head that offers immediate indexing from 0° to 105° in the A axis and through 360° in the B axis to be moved to 720 repeatable positions in 7.5 degree increments.

PH10M (Fully Motorised Probe Head)

Like the PH10T probe head, the PH10M is also a fully motorised probe head that offers immediate indexing from 0° to 105° in the A axis and through 360° in the B axis, in 7.5° increments.

SP25M (Scanning probes system)

At only 25 mm in diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.
The SP25M comprises two sensors in a single housing.

PH20 (5-Axis Touch-Trigger System)

PH20 is another innovative measurement product from Renishaw that transforms co-ordinate measuring machine (CMM) performance.

REVO (5-Axis Touch Trigger System) 

REVO is the first in a range of revolutionary products to offer 5-axis measurement capability and is designed to maximise CMM throughput whilst maintaining high system accuracy.
REVO is a dynamic new measuring head and probe system from Renishaw.

OMP40-2 (Optical Transmission Probe)

For workpiece inspection and job set-up on small to medium machining centres and small multitasking machines.
-Flexible probing solution.
-Reliable modulated optical transmission.
-Outstanding performance for less scrap and higher profits.

OMP60 (Optical Transmission Probe)

For workpiece inspection and job set-up on all sizes of machining centres and small to medium multi-tasking machines.
-Compact 3D touch-trigger probe.
-Reliable modulated optical transmission.
-Outstanding performance for less scrap and higher profits.

RMP40 (Radio Transmission Probe)

For workpiece inspection and job set-up on machining centres and multi-tasking machines
-Flexible probing solution.
-Superior communication capability.
-Outstanding performance for less scrap and higher profits.

RMP60 (Radio Transmission Probe)

For workpiece inspection and job setup on multitasking machines, machining centres and gantry machining centres.
-Flexible probing solution.
-Superior communication capability.
-Outstanding performance for less scrap and higher profits.